Raystar 125 Plus GPS Sensor Networking Capabilitie in PORT ADELAIDE, South Australia for sale
The new Raystar 125 Plus GPS sensor adds new networking capabilities making installation easier than ever with the latest Raymarine multifunction displays and instruments.
The Raystar 125 Plus now features SeaTalkng networking in addition to SeaTalk 1 and NMEA0183 capability, making it the most versatile GPS receiver available. To accommodate this added support, the Raystar 125 Plus includes a SeaTalk1 to SeaTalkng Converter kit. The kit contains all of the necessary components to interface the Raystar 125 Plus and establish a basic SeaTalkng backbone on board the vessel.
Compact and accurate the Raystar 125 Plus Satellite Differential GPS Receiver provides pinpoint accuracy to Raymarine's multifunction displays and instrument systems. The Raystar 125 Plus outputs SeaTalkng, SeaTalk 1 or NMEA 0183.
A self contained waterproof GPS receiver and antenna combined, the Raystar 125 Plus delivers accuracy better then 3 meters by decoding Satellite Differential correction signals from the WAAS (Wide Area Augmentation System.)
The Raystar 125 Plus comes with a 10 meter (33') interconnect cable, pole mounting kit, flush mounting kit and instruction manual and a SeaTalk 1 to SeaTalkng Converter Kit.
Raystar 125 Plus Features Include:
Compatible with all Raymarine Multifunction Displays, Instruments and Autopilots.
12 channel satellite receiver with Satellite Differential corrections.
WAAS, EGNOS and MSAS compatible.
User selectable SeaTalkng, SeaTalk 1 or NMEA 0183 output.
Low profile flush mount and threaded pole mount (1" x 14 TPI) kits included.
Removeable interconnect cable facilitates easy installation.
Built-in LED diagnostic indicator.
Raystar 125 Plus GPS Sensor Specifications
Power
Nominal voltage (volts DC)
12V, 24V systems
Absolute voltage range (volts DC)
9 - 32 volts (NMEA configuration) 9 - 18 volts (SeaTalk configuration)
Power consumption (typical) watts
1.2W
Physical
Overall dimensions (DxH) mm
diameter 95x30
Product weight kg (lbs)
0.13 (0.29)
Mounting methods
flush/pole/rail
Pole mount thread: 1" x 14 TPI. This is the standard thread found on VHF radio antenna mounts and extenstion poles.
Cable length
10m (33')
Data Interfacing
Protocols supported
SeaTalk ng, SeaTalk 1 or NMEA 0183 (v2.3)
User configured during installation.
Approvals
EMC Approved, Yes, Europe and FCC CE Marked Yes
Environmental
Operating temperature range -10°C to +70°C
Non-operating temperature range -20°C to +70°C
Humidity
up to 95%
Waterproofing standard
GPS Features
Active antenna
Signal acquisition 12 ch. parallel (C/A code)
Satellite differential type WAAS/EGNOS/MSAS
Differential acquisition automatic (satellite)
Beacon differential ready with RTCM input
Position accuracy (RMS)
